White Label Products

How to Use Your Products

Our brand new line of Ready-To-Use products is finally here!

 

Ready-To-Use Products

Don't know where to start or just looking to learn some Pro-tips? Click the button below for a step-by-step guide on how and when to use your new products with our Customer Care Kit car cleaning guide.

pexels-karolina-grabowska-4870697.jpg

BUG REMOVER

Specialized Bug Cleaner

Directions:
1. Only use on a cool vehicle surface. Never use in direct sunlight  or leaving active product to dry on vehicle surface.
2. Spray directly onto vehicle surface.
3. Gently agitate surface with a soft sponge or wash mitt.
4. Rinse thoroughly with cool clear water

toyota-5909443.jpg

INTERIOR UPHOLSTERY CLEANER

Interior Shampoo & Deodorizer | Universal Interior Cleaner

Directions:
For vinyl & plastic interior surfaces:
1. Spray onto surface and wipe off with a premium microfiber towel.

2. Use brush to lift heavy soils if needed.
    A. Do not use on infotainment screens, glass or clear plastic. For those surfaces, use Glass Cleaner RTU. Never spray directly onto screens or controls. Spray onto a clean microfiber towel then wipe surface.

For carpets & upholstery:
1. Vacuum area to be cleaned to remove loose dirt.
2. Spray directly on desired surface, wetting the surface evenly.
3. Use a brush to loosen stains or dirt if needed.
4. Wipe away and blot with premium microfiber towel.

     A. For extra power, use a vacuum or extractor to remove excess cleaning solution.

auto-1006216_1920.jpg

DETAILER'S ALL PURPOSE

All Purpose Cleaner

Directions:

Engine, Exterior Grill Wall, Rocker Panels & Wheels/Tires: 
1. Spray onto surfaces and allow to dwell for 1 minute. Agitate with wash sponge or brush.
2. Pressure rinse thoroughly.

Interior Rubber, Plastic, & Vinyl:
1. Spray product onto brush, towel or sponge.
2. Apply to surfaces & agitate.
3. Wipe and dry surfaces with clean towel.

Upholstery & Carpeting:
1. Spray/mist product directly onto spot for fabric to be cleaned.
2. Agitate with brush or sponge.
3. Vacuum area removing excess moisture. Towel dry using a lint free towel.

car-1882686.jpg

ENZYME UPHOLSTERY SPOTTER

Interior Cleaner & Deodorizer | Excellent for Pet & Protein Stains

Directions: 
1. Always remove excess solids or liquids.
2. Saturate stain with Enzyme Cleaner and allow to sit for 5 minutes.
3. Blot with a clean absorbent cloth. If necessary, scrub gently with brush.
4. Repeat as necessary.

pexels-pixabay-248395.jpg

SPRAY & WIPE DETAILER

With Hybrid Ceramic!

Directions:

1. Clean the exterior prior to application for best results.
    a. For best results, apply to paint that is cool and out of the sun.

2. Spray product generously onto microfiber towel and wipe onto surface (3’ X 3’ sections)

3. Buff off any remaining haze with a dry microfiber towel.

4. Work a section at a time until vehicle is completely shined.
    *Also great for use on plastics, glass, and metal.


This product can be layered for added protection and extra shine!

Streak-Free Glass Cleaner-Kaleb (5).HEIC

GLASS CLEANER

Streak-Free Formula

Directions:
1. Spray directly onto glass, chrome or mirror surface.
2. Wipe away with a premium microfiber towel or squeegee.
       A. For moisture sensitive areas like infotainment screens,
spray directly onto a premium microfiber towel and wipe.     

3. Use dry side of towel to clear up excess and provide a shine.

DSC_0308.JPG

INTERIOR DEODORIZER

Deodorizer

Directions:
1. Mist Good Scents in a sweeping motion onto the interior of the vehicle. Especially covering the affected area.

2. Brush into interior fabric for enhanced odor elimination.

3. Allow to dry.

4. Wipe any excess from interior surfaces with clean soft towel.


For vinyl or leather surfaces: Mist Good Scents onto surface and wipe dry with clean soft towel.


For added odor elimination: Start vehicle with the fan set to recirculate and high. Close all windows. Mist products onto interior surfaces.

seat-cushion-1099616_1920.jpg

LEATHER CLEANER & CONDITIONER

Specialized Leather Care

Directions:

NOT FOR USE ON SUEDE OR NUBUCK. Test small, inconspicuous leather area for color fastness prior to use.

 

1. Apply a small amount of product to a soft cloth or applicator sponge.

2. Using a circular motion, work thoroughly into leather surface.

3. Wipe off excess product and dirt using a clean soft towel.

4. May be reapplied as desired.

close-up-photography-of-vehicle-wheel-and-hankook-tire-1236788.jpg

HIGH GLOSS TIRE DRESSING

Solvent-Based Tire Dressing

Directions:
This is a ready-to-use product, intended for exterior vehicle use only. Not intended for use on motor compartments.

 

1. Apply with a trigger sprayer or sponge.

2. Wipe excess or runs with a clean cloth.

Wheel (13).jpg

VPR DRESSING

Vinyl/Rubber Dressing

Directions:
1. Clean surface with all purpose cleaner, let dry completely.
2. Spray product on applicator pad, work product onto surface.
3. Remove any excess from the wheel with a clean towel.
4. Made for exterior vehicle use only.

Engine (3).jpg

CITRUS AP DEGREASER

Featured Item

Directions:

Engine, Exterior Grill Wall, Rocker Panels & Wheels/Tires: 
1. Spray onto surfaces and allow to dwell for 1 minute. Agitate with wash sponge or brush.
2. Pressure rinse thoroughly.

Interior Rubber, Plastic, & Vinyl:
1. Spray product onto brush, towel or sponge.
2. Apply to surfaces & agitate.
3. Wipe and dry surfaces with clean towel.

Upholstery & Carpeting:
1. Spray/mist product directly onto spot for fabric to be cleaned.
2. Agitate with brush or sponge.
3. Vacuum area removing excess moisture. Towel dry using a lint free towel.

pexels-tima-miroshnichenko-6873088.jpg

PREMIUM WASH-N-WAX

Auto Hand Washing Detergent

Directions:
1. Ensure vehicle or boat surface is cool to the touch and out of direct sunlight. Do NOT wash in direct sunlight. 
2. Add 1-2 oz. of Water Wax per 1 gallon of water. 
3. Pre-rinse vehicle to cool down surface and remove loose dirt and debris. 
4. Wash surface with wash mitt and soapy surface.
5. Rinse thoroughly using clean water.
6. Dry with a premium microfiber towel.

Chevy BelAir-Red blurred motion.jpg

WATER SPOT REMOVER

Hard Water Remover

Directions:
This product is formulated as a ready-to-use product, although for vehicles with lighter water spots this product may be diluted up to 4:1 with water.

*Caution: Always cool exterior vehicle surfaces with clear water before applying Water Spot Remover RTU. This is a highly acidic product and could etch some vehicle surfaces. Precautions should always be taken.

1. May be hand sprayed or mitted onto surface of vehicle
2. Agitate with a mitt or soft bristled brush
3. Rinse thoroughly with clear water
4. Dry vehicle with clean terry towel or chamois
*Note: For best results, wash vehicle in quarter sections. Never allow product to dry on vehicle.

pexels-tima-miroshnichenko-6873088.jpg

WHEEL BRIGHTNER

Wheel Cleaner

Directions:
This is a Ready-To-Use product. Only apply to wheels that are cool to the touch. Clean and rinse one wheel at a time, never allowing product to dry on the wheel.

1. Spray evenly over wheel surface.

2. Allow product to dwell for 30-45 seconds.

3. Rinse well with cool clear water.

 

For extremely heavy brake dust, agitate the wheel surface using a wheel brush after applying Wheel Sparkle. Rinse with high pressure water.

Dodge Charger-Silver with soap (1).jpg

PREMIUM EXTERIOR WASH

cleaning-1837332.jpg

HYBRID-CERAMIC DETAILER

AUTO HAND WASHING DETERGENT

AUTO HAND WASHING DETERGENT

Directions:
1. Ensure vehicle or boat surface is cool to the touch and out of direct sunlight. Do NOT wash in direct sunlight. 
2. Add 1-2 oz. of Water Wax per 1 gallon of water. 
3. Pre-rinse vehicle to cool down surface and remove loose dirt and debris. 
4. Wash surface with wash mitt and soapy surface.
5. Rinse thoroughly using clean water.
6. Dry with a premium microfiber towel.

Directions:

1. Clean the exterior prior to application for best results.
    a. For best results, apply to paint that is cool and out of the sun.

2. Spray product generously onto microfiber towel and wipe onto surface (3’ X 3’ sections)

3. Buff off any remaining haze with a dry microfiber towel.

4. Work a section at a time until vehicle is completely shined.
    *Also great for use on plastics, glass, and metal.


This product can be layered for added protection and extra shine!

Interested in learning more about our products? Feel free to get in touch.